BMW has officially announced about plans to launch a new SUV X7. Mass production of model will begin in 2017 in the American Spartanburg.
BMW X7 will be a seven-seat SUV, which reaches a length of over 5 meters and is designed to be a direct competitor to Mercedes-Benz GL and Audi Q7. New model will share a modular platform with the BMW X5 and X6 of new generation. It is expected that due to the extensive use of aluminum and high-strength steel makers will be able to do low weight of all three models.
About engines of BMW X7 it is not currently reported, we only know that the SUV will get a completely new engines as well as hybrid power plants. But we know that cars produced in Spartanburg, will be sold around the world, although the main sales markets of BMW X7 will be China and the United States.
If the starter continues to run after the engine is started, then, on the power contacts of the traction relay voltage remains.
In this situation contacts of the traction relay or contacts in the ignition are faulty.
The voltage on the contact comes in the following way: the battery-lock, the starter relay ignition (if there are any) – the traction relay rotor. It follows that as long as we do not turn the ignition key to the “Start”, the contacts can’t get on the traction relay. So – be the first in the chain of malfunctions is the ignition.
Find in the engine compartment the wire, going to the traction relay of a starter. Typically, this wire has a plug-in connection: disconnects it and by the end of the wires going to the traction relay, after his separation, relate to battery plus (Engine is put into neutral). If the engine starts the starter motor is switched off, the originator of all is the ignition.
Extinguished lamp or absence of voltage says that the problem should be sought in the contacts of the traction relay.